Please click on a category to view products.
Free Standard Shipping on Water Heaters shipped within the Mainland Continental United States
- Designed for small office buildings and duplex apartment homes
- DynaClean™ II system reduces lime and sediment buildup
- PermaGlas® glass-lined tank resists corrosion
- Built-in safety feature prevents pilot or main burner operation if blower is not running
- PermaGlas® glass lining prevents tank corrosion
- Small diameters and shorter heights for greater installation ease
- Handhole cleanout for easy maintenance
- Automatic safety shutoff if pilot is extinguished
Conservationist® Standard Vent Gas Water Heaters>
- Blue Diamond™ glass coating delivers more than twice the corrosion resistance of industry-standard glass lining
- Features C3 Technology™ that protects against accidental ignition of flammable vapors
- Environmentally friendly Green Choice™ gas burner reduces NOx emissions by 33% compared to standard burners
- Piezo igniter for easy “no match” pilot ignition
- 96% efficiency dramatically lowers operating costs
- Patented Dynamix Cyclonic Burner™ offers precise air/fuel mixing at point of ignition
- Exhaust and air intake positioned so heater can be installed in corners or flush against wall
- 4 handy venting options using inexpensive 3˝ or 4˝ PVC pipe
- Built-in induced draft blower — helps solve negative air pressure problems
- The Eliminator™ self-cleaning system improves energy efficiency and extends tank life
- Compact design (almost a foot shorter than models they replace)
- Can be installed standalone, manifolded or connected to storage tanks
- Effikal automatic flue damper minimizes standby heat loss to achieve 80% thermal efficiency
- Inlet/outlet connections located top, front and rear for greater installation flexibility
- Space-saving units are up to one foot shorter than models they replace
- Installs standalone, manifolded or connected to storage tanks
- Small jacket diameters
- Short floor-to-vent heights
- Multiple Water Connections
- System Sentinel™ LED diagnostic system
- Patented multiflue design
- Low profile automatic flue damper
- Spark-to-pilot ignition system
- Full port, full flow brass drain valve
- Factory Installed AGA/ASME rated Temperature and Pressure relief valve
- Stainless steel burners
- 180 degree max operating temperature
- Hand-hole cleanout
- Stainless steel burners
- 180ºF max operating temperature
- LED diagnostics on all damper assemblies for easier service
- Certified for a 150 PSI maximum working pressure (160 PSI for ASME models)
- Manual reset high limit (ASME models)
- Low NOx models available
- 316L stainless steel tank construction (requires no anode rods).
- No chimney required - vents up to 40 feet using 3" schedule 40 PVC, CPVC or ABS pipe - direct vent using plastic pipe.
- Thermal efficiency of 95% dramatically reduces operating costs.
- 85 equivalent feet of vent length.
- Low NOx emissions. Meets SCAQMD Rule 1146.2.
- High impact plastic jacket eliminates dents.
- 2" of non-CFC, polyurethane foam insulation.
- Less than 1/2 degree per hour heat loss (R17).
- Corrosion resistant, high efficiency 90/10 cupronickel heat exchanger.
- Self-diagnostic electronic control with digital readout for water temperature, set point and differential.
- Removable front cover allows easy access to equipment (24" service clearance recommended).
- Temperature range from 70ºF to 160ºF (maximum temperature setting of 180ºF available on HE45-160 and HE45-199 booster models only).
- Zero clearance to all combustible surfaces.
- Factory installed AGA/ASME rated T&P relief valve.
- Small jacket diameters
- Short floor-to-vent heights
- Multiple Water Connections
- System Sentinel™ LED diagnostic system
- Patented multiflue design
- Low profile automatic flue damper
- Spark-to-pilot ignition system
- Full port, full flow brass drain valve
- Factory Installed AGA/ASME rated Temperature and Pressure relief valve
- Stainless steel burners
- 180 degree max operating temperature
- Hand-hole cleanout
- Stainless steel burners 180ºF max operating temperature
- LED diagnostics on all damper assemblies for easier service
- Certified for a 150 PSI maximum working pressure (160 PSI for ASME models)
- Manual reset high limit (ASME models)
- Low NOx models available
